Main Features：
1. Machine structure: The equipment structure is composed of steel, electric welding, sandblasting and epoxy painting.
2. The mold air chamber and support are welded with conventionally treated and anti-corrosion treated steel.
3. The guide of the moving mold has four struts, guide bushes with self-lubricating function, and is operated by two hydraulic cylinders.
4. The movement of the moving mold chamber is controlled by an encoder with an accuracy of 2/10mm, which controls the automatic zero return each time and the automatic preheating.
5. Quick mold change device: the mold is assembled in the production process of the equipment, with all the required accessories and connectors and additional mold support parts, the equipment is only stopped for a few minutes, so as to complete: the locking of the mold support, the connection, Two quick connectors, one connector for quick water filling, quick connectors for silo and ejector.
6. The machine mainly includes the following parts: industrial PLC with software to control production, quick mold change system, hydraulic power unit, load pressure, hoist, pressure setting by proportional control with PC between two steam chambers, movement by encoder Enables position control for simple and fully automated management throughout the production cycle, provides menus that have been defined and tested by the operator, at the same time offers a wide range of sequences and combinations for easy modification and use, a series of technical documentation instructions: use and maintenance, Appliances, documentation for loading material on silo, mold size specification, manual supervision procedure.
Technical parameters：